Coolant and fluid-management
products.
Select equipment by fluid type, contaminant, process, and required flow rate: water-based coolant, oil-based industrial fluids, or aqueous parts-washing chemistry.
Choose products by fluid type
Water-based coolant
Equipment for shop-wide coolant recovery, real-time mill filtration, individual-reservoir tramp-oil separation, sump cleaning, and particulate removal.
8 equipment linesBrowse coolant equipment →Oil-based fluids
The S.O.F. line purifies straight cutting oil, hydraulic oil, quench oil, EDM oil, and other neat industrial oils. Configuration is selected for the fluid and contamination load.
Application-specific configurationView the S.O.F. line →Aqueous parts washing
Industrial cleaning chemistry matched to the washer type, material, soil, concentration, temperature, and process requirements.
20 cleaners · 4 product linesSee parts-washer fluids →Equipment by operating function
Each product is listed by its specific application, treatment objective, and operating range.
C.R.O.S.S.Shop-wide coolant recyclingCentral coolant recovery for machine shops. Removes 99.75% of tramp oil and particulate by volume and maintains clean coolant for immediate use 24/7/365.2–25 GPM6 models · 120–1,500 GPHView →
TMCRSTube and steel mill coolant recoveryReal-time coolant recovery for tube and steel mills, engineered to the flow rate, contaminant load, and process requirements of the mill.Engineered to mill flowup to 990 GPM processed · scalable to 1,600+View →
Green MachinePortable sump cleanerPortable, air-powered sump cleaner that vacuums, filters, and transfers coolant at 55 to 70 GPM. It is the recommended collection device for C.R.O.S.S. batch recycling.4h → 15mper sump clean · 55–70 GPMView →
T.O.S.S. T1Portable tramp oil separatorThe portable, skid-mounted separator that wheels between CNC sumps. The same coalescing separation as the T.O.S.S. series, sized for one reservoir at a time.2 GPM21 × 14 × 25 in · on airView →
T.O.S.S.Tramp Oil Separation SystemReservoir-level tramp oil separator that operates autonomously, coalesces free and dispersed oil, and returns clarified fluid with tramp oil held below half of one percent by volume.2–50 GPM7 sizes · portable T1 at 2 GPMView →
Paper Bed FilterGravity-bed and deep-bed filtrationPulls fines and sludge from coolants, cutting oils, and grinding fluids through a disposable fabric on a self-advancing bed. The deep bed pushes flow 50% higher from the same surface.10–60 µby fabric gradeView →
MD Magnetic SeparatorMagdiskContinuous ferrous-fines removal. Rotating magnetic discs pull steel and cast-iron fines from the stream, self-discharging, with no filter media and no consumables. Commonly installed upstream of a paper bed filter or C.R.O.S.S. system.98%ferrous removal · no mediaView →
DCO Combination FilterIntegrated magnetic and paper-bed filtrationA magnetic separator and paper bed filter combined in one system. The magnetic stage removes ferrous fines first, reducing the solids load and media use at the fabric stage.2 stagesmagnet first · 98% ferrousView →Typical solids-removal sequence: magnetic separation removes ferrous fines first, followed by paper-bed filtration for non-ferrous particulate and remaining solids. The DCO combines both stages in one unit. Green Machine provides portable sump cleaning and transfer, while T.O.S.S. provides autonomous tramp-oil separation at an individual reservoir.
Parts-washing chemistry and straight-oil filtration
Parts-washer fluids provide application-specific cleaning chemistry. The S.O.F. line purifies straight and neat industrial oils in configurations selected for the fluid and contaminant load.
Parts Washer Fluids
Cleaning chemistry selected for the washer type, workpiece material, soil, and operating conditions. 20 cleaner SKUs across four lines, selected with the T.A.C.T. method: time, agitation, concentration, temperature.
View parts-washer fluids →S.O.F. line
Straight cutting oil, hydraulic oil, quench oil, EDM oil, and other neat oils across 16 fluid categories. Each system is configured for the oil, contamination, and required flow.
View the S.O.F. line →Find your part by model or nameplate number
Order parts and consumables by model or nameplate number, or request operating guidance, troubleshooting support, drawings, and manuals. EdjeTech confirms current availability for the installed unit.
Select products and request application review
Select coolant-management equipment, estimate operating savings, or request an engineering application review.
- Select coolant equipment
C.R.O.S.S. or T.O.S.S.
Compare facility-level recovery with fixed and portable reservoir treatment.
Compare equipment → - Estimate savings and payback
Savings calculator
Estimate fluid savings, disposal reduction, and application-specific simple payback using current operating costs and quoted investment.
Estimate savings → - Application review
Talk to an engineer
Request technical guidance for oil-based fluids, custom systems, or unusual operating requirements.
Request a review →