Cleaner fluid.Lower cost.Longer runs.
EdjeTech designs, builds, and services industrial coolant filtration and recycling systems for machine shops, tube mills, and high-volume manufacturing plants.
Built for
- Machine Shops
- Tube Mills
- Aerospace
- Automotive & EV
- Precision Grinding
Coolant filtration and recycling equipment
EdjeTech equipment ranges from filtration for individual reservoirs to plant-wide coolant recycling systems. Each system is selected and sized for the fluid, contaminants, flow requirements, and facility layout.
Coolant equipment organized by operating environment
Review facility-level recycling for machine shops, real-time mill coolant recovery, and dedicated equipment for individual reservoirs and specific contaminants.
C.R.O.S.S.
C.R.O.S.S. serves as the central coolant recycling system for machine shops, removing tramp oil and particulate while keeping clean coolant available for immediate use 24/7/365. Batch, central, and hybrid configurations adapt the system to the shop's workflow and layout.
TMCRS
The mill system: filters coolant in real time and returns it clean at the flow rate the mill demands, 24 hours a day. Built for tube and steel mill facilities with heavy ferrous and non-ferrous chip load and tube oil.
Single-purpose units
T.O.S.S.
Pulls free and dispersed tramp oil off individual reservoirs: CNC sumps, large tanks, pits, and washer baths.
T.O.S.S. T1
Compact 2 GPM separator that moves between individual CNC sumps and other reservoirs.
Green Machine
Air-powered. A typical sump-cleaning task that takes about four hours manually can be completed in approximately 15 minutes, and the unit can transfer dirty coolant to C.R.O.S.S.
Paper Bed Filter
Disposable media bed for continuous particulate removal, with a magnetic option.
Magnetic Separator
Pulls ferrous particulate off the stream before it reaches the pump.
S.O.F.
For straight, neat cutting oils rather than water-based coolant.
DCO Combination Filter
Magnet and paper bed in one unit: the magnet takes the ferrous fines first, the bed takes the remaining grit.
Build the savings case for your capital review
If you are evaluating coolant recycling as a capital purchase, use your fluid spending and disposal costs to estimate savings and payback for the capital review.
What manufacturing engineers report
Feedback from manufacturing engineers who selected EdjeTech equipment to address fluid-management problems in their facilities.
The EdjeTech unit is a way to keep our machines fresh. I prefer to buy from a professional with experience and I liked the solution that was provided. You need to give them a call to see if they have a solution that will fit your needs.
We had a significant problem with oily parts coming out of a washer attached to a fine grinder. I was looking for a better way to remove the oil from the wash bath than the disc skimmer that was previously on the tank. Your unit has been very good.
Coolant systems for precision machining operations
From single-machine job shops to centralized multi-line plants, matched by chip load, fluid, and flow rate.
Machine Shops
Control contamination, extend coolant life, and reduce sump-cleaning demands across CNC machining, precision grinding, and milling, from individual reservoirs to shop-wide recovery.
Engineered for the application. Supported for long-term operation.
Sized to the fluid, process, and facility, then supported with technical assistance, consumables, and replacement parts.
Engineered for your plant
Each system is sized and built around your fluid, layout, and volume, so the equipment fits the operation you already run.
Application-specific equipment review
An engineer reviews the process, fluid, contaminants, and operating requirements before recommending equipment.
Long-term parts and technical support
Made in Sullivan, Ohio. EdjeTech provides technical assistance, consumables, and replacement parts for installed equipment.
Select resources by coolant-management need
Select the operating issue or application that most closely matches your facility.
Choose the next step for your project
Request a quotation, discuss your application, compare central-system capacities, or estimate potential operating savings.
- System quotation
Request a quote
Provide the process and fluid information for review by an application engineer.
Request a quote → - Application review
Talk to an engineer
An engineer reviews the fluid, process, contaminants, and operating requirements.
Request an application review → - Select coolant equipment
C.R.O.S.S. or T.O.S.S.
Compare facility-level coolant recovery with fixed and portable reservoir treatment.
Compare equipment → - Savings estimate
Savings calculator
Estimate annual savings and payback using current fluid and disposal costs.
Estimate potential savings →
Already own an EdjeTech system?
Find parts by model or nameplate number, request technical help, or ask which drawings and manuals are available for the installed unit.